AES-ZU3EGES-1-SK-G by Avnet Engineering Services | Development Kits | Avnet AMERICAS
Close
loading
Close
loading
Close
loading
printPRINT image Bookmark Share
Send a link to this page
Please enter a valid Email id
Link
Send to
jsmith@baa.com
sjohnson@baa.com
Add another address
Add another address
Add another address
Subject
Message

AES-ZU3EGES-1-SK-G

Logo for Avnet Engineering Services

Manufacturer Part #: AES-ZU3EGES-1-SK-G

Alternate Part #: AES-ZU3EGES-1-SK-G

UltraZed-EG Starter Kit (SOM and Carrier Card)


legend NCNR
Descriptions
Documents
Subs/Alternatives
Information

The UltraZed-EG Starter Kit consists of the UltraZed-EG System-on-Module (SOM) and IO Carrier Card bundled to provide a complete system for prototyping and evaluating systems based on the Xilinx powerful Zynq® UltraScale+ MPSoC device family.

Key Features

Carrier Card Features:
  • Single UltraZed-EG SOM slot
  • microSD card connector
  • PS PMOD header
  • Dual USB-UART
  • Display port connector (x2)
  • USB 2.0/3.0 connector
  • SATA host interface
  • RJ45 connector12 PL PMOD headers
  • Arduino connectors
  • PL user 8-position DIP switch
  • 4 PL user push switches
  • 8 PL user LEDs
  • PS user LED
  • PS user push switch
  • PMBus header
  • PS VBATT battery
  • SOM reset switch
  • Differential clock generator
  • Digilent USB-JTAG module
  • PC4 JTAG header
  • SYSMON header
  • I2C MAC Address device
  • LVDS Touch Panel interface
  • USB connector (for dual USB-UART)
  • 3 JX micro Connectors:
    • 180 user PL I/O pins
    • 26 user PS MIO pins (one full MIO bank)
    • 4 PS GTR transceivers
    • 4 PS GTR reference clock inputs
    • PS JTAG interface
    • PL SYSMON interface
    • USB 2.0 connector interface
    • Gigabit Ethernet RJ45 connector interface
    • PMBus interface
    • SOM PS VBATT battery input
    • Carrier Card I2C interface

SOM Features:
  • Xilinx XCZU3EG-1SFVA625 device
  • DDR4 SDRAM (2GB, in x32 configuration)
  • Dual QSPI Flash (64MB)
  • I2C EEPROM (2Kb)
  • eMMC Flash (8GB, in x8 configuration)
  • USB 2.0 ULPI PHY
  • Gigabit Ethernet PHY
  • I2C 8-bit I/O expander
  • 2-channel I2C switch/mux
  • PS reference clock input
  • On-board voltage regulators
  • Power-On Reset (POR) circuit
  • 4-position boot mode DIP switch
  • Linux BSP and reference designs
  • 3 JX micro-header connectors (2 x 140-pin, 1 x 100-pin) providing the following connections to the Carrier Cards
    • 180 user PL I/O pins
    • 26 user PS MIO pins (one full MIO bank)
    • 4 PS GTR transceivers
    • 4 PS GTR reference clock inputs
    • PS JTAG interface
    • PL SYSMON interface
    • USB 2.0 connector interface
    • Gigabit Ethernet RJ45 connector interface
    • PMBus interface
    • SOM PS VBATT battery input
    • Carrier Card I2C interface
    • SOM Reset input
    • Carrier Card interrupt input
    • Carrier Card Reset output
    • Power Good output
    • SOM to Carrier Card ground pins
    • SOM input voltages and output sense pins

Technical Attributes

Description
Value
Find similar Parts
Category
Programmable Logic Tools
Type
Starter Kit
Ethernet
Yes
Interface Standards
PMOD, Arduino, SYSMON, SATA
USB
USB OTG, USB-Serial Bridge, USB 3.0
Package Dimensions
5.0 x 8.0 in
Maximum Processing Temperature
85 °C
Memory Card Interface
microSD Card
Display Mode
LVDS Touch Panel, DisplayPort
GPIO
Yes

ECCN / UNSPSC

Description
Value
ECCN:
4A994
SCHEDULE B:
8471500150
HTSN:
8471500150
UNSPSC:
32101502
UNSPSC VERSION:
V15.1101

Documents

Added to your BOM
This item has been added to your "Exact Matches"
Add to BOM
Add to new BOM
Your BOM's
CLOSE

Your Price:

USD     $895.00
  • More available in: 2 weeks
  • Quantity:

    - | +

    Min: 1  Mult: 1


    image

    Invalid Quantity

    Need More?Request Quote

    Need More?Request Quote

    SubTotal


    Add to Cart

    Add to Cart
    Add To BOM