AES-Z7PZ-SDR2-DEV-G by Avnet Engineering Services | Development Kits | Avnet AMERICAS
Close
loading
Close
loading
Close
loading
printPRINT image Bookmark Share
Send a link to this page
Please enter a valid Email id
Link
Send to
jsmith@baa.com
sjohnson@baa.com
Add another address
Add another address
Add another address
Subject
Message

AES-Z7PZ-SDR2-DEV-G

Logo for Avnet Engineering Services

Manufacturer Part #: AES-Z7PZ-SDR2-DEV-G

Alternate Part #: AES-Z7PZ-SDR2-DEV-G

PicoZed SDR 9361 Development Kit - PicoZed SDR 2x2 SOM based


legend NCNR
Descriptions
Documents
Subs/Alternatives
Information

The PicoZed SDR Development Kit bundles everything required to start your software-defined radio (SDR) design. The kit includes the low-power, small footprint, rugged PicoZed SDR 2x2 system-on-module (SOM) and a carrier card for prototyping with standard high bandwidth interfaces like USB, Gigabit Ethernet, SFP+, and RF power modules. The carrier also includes HDMI, audio, and a camera module interface to enable a host of new SDR applications requiring audio/video and embedded vision. Data acquisition is managed under Ubuntu Linux running on the dual ARM-9 processor within the Zynq SoC, supporting fast data exchange over Ethernet to MATLAB® and Simulink®. Open source reference design source code can be downloaded and reused in your design. Also included are the cables, power supplies, and software required to use the kit immediately for software development and application prototype. Supported by robust simulation and code generation tools that integrate seamlessly with Xilinx Vivado® Design Suite, PicoZed SDR enables dramatic reduction in design cycles of your software-defined radio products.

Key Features

SOM Overview
  • Fully-verified, low-power, rugged system-on-module (SOM) ready for end-product deployment
Digital Processing
  • Xilinx Zynq XC7Z035-2L FBG676I AP SoC
  • 1GB DDR3 SDRAM
  • 256Mb QSPI Flash
  • microSD Card Interface
  • 10/100/1000 Ethernet PHY
  • USB 2.0 OTG ULPI PHY
  • Supported by MATLAB® and Simulink® for data streaming and Zynq targeting
Radio Transceiver
  • Analog Devices AD9361-BBCZ Integrated RF Agile Transceiver
  • RF 2 × 2 transceiver with integrated 12-bit DACs and ADCs
  • Band: 70 MHz to 6.0 GHz
  • TDD and FDD operation
  • Tunable channel BW: <200 kHz to 56 MHz
  • Supports MIMO radio: < 1 sample sync on both ADC and DAC
  • Miniature RF connectors – 4 TX, 4 RX, 2 TX monitor
FMC Carrier Card
  • 10/100/1000 Mbps Ethernet PHY and connector
  • 10/100/1000 Mbps Ethernet connector
  • USB2.0 OTG micro-USB Type AB connector
  • SFP+ connector and cage
  • 1 user GTX channel
  • HDMI Output - AD7511 Transmitter
  • Audio CODEC - ADAU1761
  • Avnet Camera Module connector
  • Avnet RF Module (PA/LNA) connector
  • FMC (Low Pin Count; 1 GTX)
  • 2 Pmod™ interfaces (1 PL; 1 PS)
  • Standard SD card interface
  • USB-to-UART
  • PC4 JTAG configuration port
Additional Specifications
  • Voltage regulation and sequencing with power-good failsafe circuits
  • Power and signal interface through 4 micro header connectors
  • Clock and frequency synthesis circuits
  • Includes schematics, BOM, HDL, Linux drivers and application software

Technical Attributes

Description
Value
Find similar Parts
Type
Processor Tools
Category
Processor Tools

ECCN / UNSPSC

Description
Value
ECCN:
5A991.G
SCHEDULE B:
8471500150
UNSPSC:
32101502
UNSPSC VERSION:
V15.1101

Block Diagram

Block Diagram Zoom
Block Diagram

Documents

Type
Document Title
Download
Added to your BOM
This item has been added to your "Exact Matches"
Add to BOM
Add to new BOM
Your BOM's
CLOSE

Your Price:

USD     $1,799.00

Quantity:

- | +

Min: 1  Mult: 1


image

Invalid Quantity

Need More?Request Quote

Need More?Request Quote

SubTotal


Add to Cart

Add to Cart
Add To BOM